Nokia Beacon G6 - ETSI CPE Safety Guidelines; 2.2 Safety Instructions

ETSI CPE
Overview
safety guidelines
Beacon G6
2 ETSI CPE safety guidelines
2.1 Overview
2.1.1 Purpose
This chapter provides information about the mandatory regulations that govern the installation and
operation of devices.
2.1.2 Contents
2.1 Overview
2.2 Safety instructions
2.3 Safety standards compliance
2.4 Electrical safety guidelines
21
21
22
25
2.2 Safety instructions
This section describes the safety instructions that are provided in the CPE customer documentation
and on the equipment.
2.2.1 Safety instructions
The safety instructions are provided in the customer documentation. Observe the instructions to
meet safety requirements.
The following is an example of the Danger instruction.
DANGER
Hazard
Possibility of personal injury.
The Danger instruction indicates that the described activity or situation may pose a threat to
personal safety. It calls attention to a situation or procedure which, if not correctly performed or
adhered to, may result in death or serious physical harm.
Do not proceed beyond a Danger box until the indicated conditions are fully understood and met.
The following is an example of a Warning instruction.
Use subject to agreed restrictions on disclosure and use.
Issue 1 3FE-49949-AAAA-TCZZA 21
June 2022