Configure a Beacon G6
Network configuration
Configuring Upstream (US) Classifier
Table 7-19 US Classifier - Policy parameters (continued)
Enter a VLAN ID.
Allowed values: 0 to 4093
This field is not configurable. The VLAN tag is set to 8100 (hexadecimal).
Determines the VLAN tag used inside the GRE tunnel.
Enter a VLAN priority level. A lower number indicates a higher priority.
Allowed values: 0 to 7
This field is not configurable. All tunnel packets are generated with a default DSCP value (usually 0).
Allowed values: 0 to 63
Select the toggle button to enable dropping of the packets.
3
Click Save. The policy is added to the policies table.
To delete a policy, click Delete next to the policy entry in the table. A policy can only be deleted
if it is not associated with any classifier rules.
4
Select the Classifier tab.
All classifiers are displayed in the classifier table in the page.
Use subject to agreed restrictions on disclosure and use.
110 3FE-49949-AAAA-TCZZA
To Next Page
Loading...
