Configure a Beacon G6
Network configuration
Configuring wireless 2.4 GHz
2
Configure the following parameters:
Table 7-13 Wireless (2.4GHz) parameters
Select the toggle button to enable Wireless (2.4 GHz).
Select a wireless mode from the list:
• Auto (b/g/n/ac/ax)
• Auto (b/g/n/ax)
• b/g/n
• b
• g
• n
• b/g
• g/n
• n/g
• ax/g
Select the bandwidth range from the list:
• Auto (auto-assigns the bandwidth range)
• 20 MHz
• 40 MHz
• 20/40 MHz
Select a channel from the list or select Auto to auto-assign the channel.
Select a percentage for the transmitting power from the list:
• 25%
• 50%
• 75%
• 100%
Select an option from the list to enable or disable wireless multimedia:
• Enable
• Disable
Select an option from the list to enable or disable MU-MIMO:
• Enable
• Disable
Enter the maximum number of users.
Select an SSID from the list.
Use subject to agreed restrictions on disclosure and use.
94 3FE-49949-AAAA-TCZZA
To Next Page
Loading...
