Steps
1. From Target partition, select Display.
2. From State partition, select Off.
3. Click Write.
4. Click Close to end the lights testing.
Switching S60 keyboard lighting ON using Phoenix
Prerequisites
First, go through steps 1-5 in Switching display lighting ON using Phoenix (page 3–49), if not done yet.
Steps
1. From Target partition, select S60.
2. From State partition, select On.
3. Set Level to 100 and click Write.
4. Click Close to end the lights testing.
Switching S60 keyboard lighting OFF using Phoenix
Prerequisites
First go through steps 1-5 in Switching display lighting ON using Phoenix (page 3–49) if not done yet.
RM-247
BB Troubleshooting and Tuning Guide
Issue 1 COMPANY CONFIDENTIAL Page 3 –51
Copyright © 2008 Nokia. All rights reserved.