ST-53 Rework stencil
ST-53 is a rework stencil used with rework jig RJ-166.
ST-55 Rework stencil
ST-55 is a rework stencil used with rework jig RJ-157 and RJ-160.
ST-59 Rework stencil
ST-59 is a rework stencil used with rework jig RJ-169.
SX-4 Smart card
SX-4 is a BB5 security device used to protect critical features in tuning
and testing.
SX-4 is also needed together with FPS-10 when DCT-4 phones are
flashed.
Cables
The table below gives a short overview of service devices that can be used for testing, error analysis, and
repair of product RM-247. For the correct use of the service devices, and the best effort of workbench setup,
please refer to various concepts.
RM-247
Service Tools and Service Concepts
Page 2 –14 COMPANY CONFIDENTIAL Issue 1
Copyright © 2008 Nokia. All rights reserved.
To Next Page
Loading...
