Service instructions
Service instructions for DVB-H repairs
Note: Please see service concepts from the Service tools and service concepts (page 6–18) chapter.
DVB-H setup and self test
Setup for DVB-H Self test
Steps
1. Connect the phone to setup with product specific adapter FS-51.
2. Start Phoenix and set Operation mode to Local
3. Provide SW update
DVB-H Self test
Prerequisites
Run DVB-H Selftest in Phoenix (Selftest UI not available with FLS-4S. With FLS-5 the Selftest UI is available.)
Steps
1. From the File choose Scan Product .
2. From Testing menu select Self Test.
3. Select ST_DVB-H_TEST box ( see figure below).
RM-247
TV troubleshooting
Issue 1 COMPANY CONFIDENTIAL Page 6 –5
Copyright © 2008 Nokia. All rights reserved.
To Next Page
Loading...
