iv Name the file so that you can easily identify it, and click Open.
The name of the file and its location are shown.
v To create the
Request
file, click Start.
vi When the file for certificate restore has been created, send it to Nokia as an e-mail attachment.
3. Restore certificate.
For this procedure, you must supply +12 V to CU-4 from an external power supply.
i Save the reply file sent by Nokia to your computer.
ii Start
Phoenix
service software.
iii Choose File→Scan Product .
RM-247
BB Troubleshooting and Tuning Guide
Page 3 –36 COMPANY CONFIDENTIAL Issue 1
Copyright © 2008 Nokia. All rights reserved.