ACCESS GATEWAY
308 Quick Reference Guide
ARP Interface
Table
Adds or deletes an Address Resolution Protocol (ARP) table entry. All ARP
configuration additions and deletions now made on the same
page.Manually added ARP (Static/Persistent) are now shown in their own
section for easy reference.
Bridge Mode Enables the Bridge Mode option.
Clustering The ability to cluster multiple gateways on one network segment.
Dynamic Proxy A function that assures a subscriber can be connected.
Export Exports the system’s configuration settings to an archive file.
Factory Imports the factory default settings.
Fail Over Sets up a “sibling” Nomadix Gateway, allowing one device to take up the
users should the other device become disconnected from the network.
History Displays a history log of the system’s activity, including Access, Reboot and
Uptime.
ICMP Sets up ICMP blocking for traffic from “pending” or “non authenticated”
users that are destined to addresses other than those defined in the pass-
through (walled garden) list.
Import Imports previously exported system configuration settings from an archive
file.
Login Sets up the login name and password.
Mac Filtering Blocks malicious users based on their MAC address. Up to 50 MAC
addresses can be blocked at any one time.
Reboot Reboots the Nomadix Access Gateway.
Route Add Adds a route into the Nomadix Access Gateway’s routing table.
Route Delete Deletes a route to a specific IP destination.
Routing View Nomadix Access Gateway’s routing table; Add or delete a route to a
specific IP destination.
Session Limit Limits the number sessions any one user can take over a given time period
and, if necessary, then blocks malicious users.
Static Port-
Mapping Add
Sets up static port-mapping schemes.
Items Description
To Next Page
