ACCESS GATEWAY
Quick Reference Guide 309
Static Port-
Mapping Delete
Deletes static port-mapping schemes.
Static Port
Mapping
Set up or delete static port-mapping schemes.
Subscriber
Interfaces
Blocks subscriber interfaces.
Syslog Displays syslog history.
System Utilization Displays system utilization information.
Upgrade Obtain the latest Firmware Upgrade Procedure from Nomadix Technical
Support.
User Settings Blocks IPPROTO traffic from misconfigured subscribers.
Items Description
ARP Add Adds an Address Resolution Protocol (ARP) table entry.
ARP Delete Deletes an ARP table entry.
Bridge Mode Enables the Bridge Mode option.
Export Exports the system’s configuration settings to an archive file.
Factory Imports the factory default settings.
FailOver Sets up a “sibling” Nomadix Gateway, allowing one device to
take up the users should the other device become
disconnected from the network.
History Displays a history log of the system’s activity, including Access,
Reboot and Uptime.
ICMP Sets up ICMP blocking for traffic from “pending” or “non
authenticated” users that are destined to addresses other than
those defined in the pass-through (walled garden) list.
Import Imports previously exported system configuration settings from
an archive file.
Items Description
To Next Page
