Description
2-1
Part 1108061-02
E 2015 Nordson Corporation
Section 2
Description
Introduction
This manual covers Nordson Colormax Engineered powder coating
systems. It includes a description of the major system components and their
operation; daily operation procedures; maintenance, troubleshooting, and
repair procedures; and part numbers for normal wear items.
Because powder coating systems are customized to meet customer
requirements, your system may have controls and equipment not described
in this manual or located in different positions. Your Nordson representative
can provide you with additional information and training to supplement this
manual.
ColorMax Engineered systems are available in the following configurations:
Air Flow (CFM): 9,000
11,250
15,750
22,000
Lengths: 4.5 meters (14.7 ft)
6 meters (19.7 ft)
7.5 meters (24.6 ft)
9 meters (29.5 ft)
Widths: 1.5 meters (4.9 ft)
1.75 meters (5.7 ft)
2.00 meters (6.6 ft)
2.25 meters (7.3 ft)
2.50 meters (8.2 ft)
Electrical: 380/415 V, 3 phase, 50 Hz
200 V, 3 phase, 50 Hz
To Next Page
Loading...
