Nordson ColorMax Customer Product Manual

Operation
4-13
Part 1108061-02
E 2015 Nordson Corporation
Color Change Procedure
A separate illustrated Color Change guide, part number 1108059, can be
ordered from your Nordson Representative.
NOTE: Whenever it becomes difficult to blow powder off the canopy
surface, perform the Booth Canopy Conditioning procedure on page 5-5.
Conditioning keeps the canopy easy to clean and reduces the potential for
contamination of reclaimed powder.
Conditions for an Effective Color Change
In order for the color change process to be effective, do the following:
S Keep spare sieve screens and powder supply containers available to
allow quick replacement during color change and thorough cleaning
while the system is coating parts.
S Operate the system in spray-to-reclaim mode during normal operation.
S Keep the area around the booth clean to avoid cross-contamination of
powder.
S Condition the booth interior at least once each week. Refer to Booth
Canopy Conditioning in the Maintenance section for more information.
Color Change Process Monitoring
Refer to page 4-6. The automatic portion of the color change process can
be monitored from the Main System Panel by opening the Color Change
Control screen.

Nordson ColorMax Specifications

General

Brand	Nordson
Model	ColorMax
Category	Paint Sprayer
Language	English