EasyManua.ls Logo

Nordson ColorMax - Procedure 9: System Operation Settings - Operator B (Part 2); Select Box or Hopper Configuration; Configure Spray-to-Reclaim or Spray-to-Waste; Enable Powder Feed Systems

Nordson ColorMax
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Description
2-5
Part 1108061-02
E 2015 Nordson Corporation
Ducts and Cyclone System Components
See Figure 2-3.
Table 2-3 Cyclone System Components
Item
Component Description
1 Cyclones Separate the usable powder from the air flow through the
recovery system.
2 Banjo Receives the air and fine powder dust flowing out of the
cyclone and directs it through ductwork to the afterfilter.
3 Transfer Pan Collects the powder that falls out of the air stream and
fluidizes it for transfer to the feed center.
3 Transfer Pump Transports reclaimed powder from the transfer pan to the
powder feed center.
To
Afterfilter
1
1
2
3
4
Figure 2-3 Colormax Engineered System Booth Duct and Cyclone Operation

Table of Contents

Other manuals for Nordson ColorMax

Related product manuals