Description
2-14
Part 1108061-02
E 2015 Nordson Corporation
Typical System Options
Refer to the manuals shipped with optional equipment for more information,
or contact your Nordson Corporation representative.
Table 2-9 Typical System Options
Equipment
Description
Air Dryer Removes moisture from the system air supply. Most systems use
regenerative-desiccant or refrigerated air dryers.
Spray Gun Positioners,
Oscillators, and
Reciprocators
Move the guns in and out of the booth and up and down in repetitive or
programmed patterns for thorough part coverage.
Powder Drum
Unloaders (Bulk
Unloaders)
Transfer powder from shipping drums to the powder feed center.
Fluidizing Hoppers Plastic box with a fluidizing plate in the bottom, allowing powder to fluidize
using air pressure.
iControl Integrated
Control System
Identify and track parts on the conveyor line and control automatic spray gun
movement, triggering, powder flow and velocity, and electrostatic output.
To Next Page
Loading...
Need help?
General
