Nortel BCM50a - Page 256

256 Appendix G Command Interpreter
N0115791
<iface> leave
<group>
Removes an interface from a group.
<iface> query
Sends an IGMP query on the specified
interface.
<iface> rsptime
[time]
Sets the IGMP response time.
<iface> start
Turns on IGMP on the specified interface.
<iface> stop
Turns off IGMP on the specified interface.
<iface> ttl
<threshold>
Sets the IGMP Time To Live threshold.
<iface> v1compat
[on|off]
Turns on or off IGMP version 1 compatibility
on the specified interface.
robustness <num>
Sets the IGMP robustness variable.
status
Displays the IGMP status.
alg
display
Shows whether the Application Layer
Gateway is enabled or disabled.
siptimeout <timeout in
second> or 0 for
no timeout
Sets the SIP timeout period.
enable <ALG_FTP|ALG_H323
|ALG_SIP>
Turns on the ALG.
disable <ALG_FTP|ALG_H323
|ALG_SIP>
Turns off the ALG.
Table 59 IP commands
Command Description