Software Installation
NCS Manual PN 51095:B1 3/08/02 19
5. Select "DATA CD". The program will launch at this point.
6. Select files for backup. The directory C:\NOTIFIER\NCS contains important information and
should be included in the backup. Click the ADD button after each selection.
7. Click "Create CD" button on the toolbar. The CD creation Setup comes up with default
settings.
8. Click OK. The CD writer will copy the selected files onto the CD. When copying is complete,
the message "CD created successfully" will appear.
9. Click OK.
1.4.4 Windows 2000 Secure Desktop Configuration
The Onyx computers come pre-installed with Secure Desktop. This application prevents
unauthorized access to non-fire applications. To fully enable the software, and to comply with
UL-864, follow these steps:
1. From the Start Menu, select Secure Desktop, then Secure Setup.
2. The current configuration will indicate "Windows Explorer or Program Manager (Default)".
Change this to "Secure Desktop Icon Settings and General Options".
This will enable operation of certain applications only, such as the NCS and related programs,
VeriFire programs, and CD Burner software. The Windows Explorer Desktop will be replaced with
the Secure Desktop.
www.PDF-Zoo.com
To Next Page
Loading...
