NSK MEGATORQUE M-ESA-Y2005V25 - Reading Current Position

— 9-18 —
9.1.10.3. Reading Current Position
1 Reading current position via the position scale in the unit of pulses
1) Current position is displayed in real time in the units of pulse.
Readout indicated on the display changes immediately following motion of the rotor.
:
:
:TP2/RP
********
/P 2
$
T
ENT
PR
2) Press the BS key to end the display.
:
:TP2/RP
********
:_
BS
2 Reading current position via the position scale in the unit of 1/100 degree
1) Reading current position via the position scale in the unit of 1/100 degree.
Readout indicated on the display changes immediately following motion of the rotor.
:
:
:TP5/RP
********
/P 5
%
T
ENT
PR
2) Press the BS key to end the display.
:
:TP5/RP
********
:_
BS
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com