NSK MEGATORQUE M-ESA-Y2005V25 - CPU Error

— 14-14 —
14.2.4.14. CPU Error
[Output] DRDY: Open
[TA] C3>CPU Error
[LED] C3
[Motor condition] Servo-OFF
Table 14-23: Cause and remedy: CPU error
Cause Remedy
(1) A wrong program is called due to noise. • Apply the remedy for noise.
(2) Memory is defective.
(3) CPU is defective.
• Change Driver Unit.
• Replace Driver Unit.
◊ Standard ESA Driver--------------------[Appendix 4]
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com