— 9-34 —
9.3.2.3. Password
l Among the communication commands used for this System, some special commands (such as AB,
PA, SI, etc.) require password entry for preventing erroneous entries. These commands cannot be
entered in the same manner as other commands.
l The password is /NSK ON (a space between K and O) as shown below. If the Driver Unit accepts
it, it returns an “NSK ON” message.
l A command requiring password entry may only be executed immediately after the password is
entered.
Figure 9-36: Password Example
:/NSK ON
NSK ON
:_
Entered passward
Input (To Driver Unit)
NO 0DHKSN/
Echo back (From Driver Unit)
Waiting for a command to be entered
NO 0AH0DHKSN/
NO 0AH0DHKSN
(a)
(b)(a)
(b)
:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...