Oberheim Matrix-12 User Manual

• The MATRIX-12 will not permit you to compare multiple Voices that have
been edited. You will need to select each Patch individually and compare
them one at a time.
• You cannot STORE (program into memory) while comparing. If you attempt
to STORE the patch while comparing, the Upper display in the PAGE
MODIFIER section will read:
COMPARING - CANT STORE
• You cannot change to a different Patch number while comparing. If you
attempt to switch to another MULTI Patch while comparing, the Upper
display in PAGE MODIFIER will read:
COMPARING - CANT CHANGE PATCHES
You can, however, switch into SINGLE PATCH Mode while comparing. If
you then return to MULTI PATCH Mode, the Patch that you were working
with will be recalled in its edited state. The Patch Number will have
stopped flashing and will be underlined again.
To stop the compare activity, press the MULTI PATCH button again. The
sound of the Patch as well as all of the displays will return to the edited
state. The Patch number will stop flashing and will be underlined again.
NOTE: The preceeding two examples are the only two ways that you can
exit an edited Patch and return to it in its edited state without
performing the STORE function. If you select another MULTI Patch
before Storing, the one that you were just editing will drop its edits.
When you select this Patch again, it will be recalled in its original,
unedited state.
Matrix-12 Owner's Manual 171

Oberheim Matrix-12 Specifications

General

Brand	Oberheim
Model	Matrix-12
Category	Synthesizer
Language	English