Oberheim Matrix-12 User Manual

Remember, if a Slave receives a MIDI "Note On" command, it
must receive a MIDI "Note Off" command orthat note will get
locked onto the Slave. AfyTEprovides the way to remove stuck
notes without having to turn your instruments off and on again,
which is usually your first reaction, right?
There are a number of different reasons why notes become
locked or stuck, but they almost always relate to some form of a
"broken" MIDI connection that occurs while notes are being sent
from Master to Slave. A faulty or disconnected MIDI cable is often
the case, which prevents the "Note Off" command from reaching
the Slave.
Other reasons could possibly be a malfunction in the Master's
MIDI OUT transmission of the notes or the Slave's MIDI IN
reception. Also, if several (more than five) MIDI instruments are
connected in a chain using MIDI THRU, the chances of note lock
occurring will increase, especially with the instrument at the end
of the chain. MIDI Note lock is not a very frequent occurance but
if you are experiencing this too often, you may need to have
either your Master or Slave instrument serviced.
The MATRIX-12's TUNE PAGE button also provides a way to
mute notes, but unlike the MUTE function will also reset the
Release times of the Envelopes so that any sound dying out will
be cut off.
MISC
The M/SCSub-Page of the MASTER PAGE provides the control parameters that
are used to set the MATRIX-12's internal and MIDI OUT Velocity Scaling and
Sensitivity as well as the polarity selection of its Pedal Inputs, Levers and External
Trigger Input.
MISC Page 1
VELOCITY SCALES
VELOCITY SCALE SENSITIVITY
SCALE 5
63
.- J
68 Matrix-12 Owner's Manual

Oberheim Matrix-12 Specifications

General

Brand	Oberheim
Model	Matrix-12
Category	Synthesizer
Language	English