Oberheim Matrix-12 User Manual

Primary Page Selection -
MULTI PATCH Pages
Pressing the button to the immediate left of any MULTI PATCH Page name
(printed on the front panel in Grey lettering) will select the Primary Page for
that function and display its current status in the PAGE MODIFIER Section.
The LED next to its switch will light and the windows in PAGE MODIFIER will
then do one of three things:
1. If TRANS, PAN, VASSIGN, VOLUME, VIB or DETUNE is
selected, the PAGE MODIFIER will display the available parameters for that
Page in the Upper Display along with their current settings in the Lower
Display. The VOICES 1 -6/VOICES 7-12 select switch LED will be lit
showing you that you are able to switch between Voice Banks.
2. If ZONE X is selected, the PAGE MODIFIER will prompt you to select
which one:
SELECT ZONE FROM 1 TO 6
For added programming speed, pressing the button for this Page a
second time calls up the last ZONE you selected.
3. If NAME is selected, PAGE MODIFIER will display the MULTI Patch's name"
for you to examine or change.
Primary Page Selection -
MASTER PAGE Sub-Pages
Pressing the button beneath the name of any MASTER PAGE Sub-Page
displayed on the PAGE MODIFIER windows will select the Primary Page for
that function and display its current status in the PAGE MODIFIER Section.
PAGE MODIFIER Displays
Once you have selected a Page to work with, notice what happens with the
SWITCH MODE lights in the PAGE MODIFIER section. Depending on which
Primary Page you have selected, these LEDs will inform you as to what kind of
operation the six switches directly beneath the window are able to perform.
• Upper Display SWITCH MODES will either be MODULATION PAGE
SELECTor ON/OFF status.
If MODULATION PAGE SELECT is lit, this is telling you that the parameters
displayed are able to be modulated by any one or several (up to six) of the
MATRIX-12's 27 Sources of Modulation. Pressing any one of these
switches will select that parameter to be modulated. In otherwords,
pressing a switch beneath a certain parameter name on the display selects
that parameter to be a Modulation Destination.
In some instances you will notice that one or more of the available
parameters will not be able to be modulated and their switches will
not be active in this mode. Some examples of these would be VCO 1 and
VCO 2 DETUNEand the five POINT values of the TRACK X Generator.
40 Matrix-12 Owner's Manual

Oberheim Matrix-12 Specifications

General

Brand	Oberheim
Model	Matrix-12
Category	Synthesizer
Language	English