Oberheim Matrix-12 User Manual

On the Keypad, type in any 2-digit Patch number from the bank of
SINGLE Patches. For our experiment, type in "22" which is the Stock
SINGLE Patch FAMOUS $. When the Patch number is entered from
the Keypad the "00" default Basic Patch numbers across the display
will be replaced by the number "22" and the Edit Indicator dots will
disappear.
NOTE: The Stock SINGLE Patch FAMOUS $will be recalled only if
this Patch is still in SINGLE Patch memory. If you have edited
SINGLE Patch 22, or replaced it with another one, the Patch
that is currently in SINGLE Patch location 22 will be the one
that is recalled.
Press the VOICES 1-6/VOICES 7-12 button so that VOICES 7-12
are selected. Notice that SINGLE Patch 00 is being displayed for these
Voices and the Patch numbers are underlined to show that they have
been selected.
Type in SINGLE Patch 22 on the Keypad. As with VOICES 1 -6, the
M00" default Basic Patch numbers across the display will be replaced by
the number "22" and the Edit Indicator dots will disappear.
STEP 3: STORE the New MULTI Patch
Press the MULTI PATCH button. The Patch number underlines of the
displayed Voices will disappear and the MULTI Patch number will be
underlined.
Press and hold the STORE button. The currently displayed MULTI
Patch number will be replaced by two "**" as long as the STORE button
is held down.
While the STORE button is being held down, type in a 2-digit MULT!
Patch number. It can be the same number of the current Patch, or it can
be another MULTI Patch:
• If you select the current Patch number, this new MULTI will be
written into memory over the previously Stored MULTI Patch.
• If you select another MULTI Patch number, the new MULTI that we
just put together will be copied to - and will replace -the
destination Patch. The MULTI Patch number that you selected as
the location in memory where the new MULTI was edited will not be
changed.
At this point, you may also want to name this new MULTI Patch since
the title OBERHEIMw'iW still be displayed. Select the NAME parameter
from the SINGLE/MULTI PATCH PAGE SELECT section. The MULTI
Patch Name is programmed in the same way as SINGLE Patches. (See
Page 139.)
164 Matrix-12 Owner's Manual

Oberheim Matrix-12 Specifications

General

Brand	Oberheim
Model	Matrix-12
Category	Synthesizer
Language	English