Oberheim Matrix-12 User Manual

If ON/OFF is lit, the parameters displayed are able to be turned ON and will
be underlined.or OFF and will be de-underlined.
• Lower Display SWITCH MODEs can either be VALUE X or ON/OFF status:
If VALUE X is lit, the Amount values of the parameters displayed in the
Upper window can be selected by pressing the button beneath the
number displayed.
If ON/OFF is lit, the parameters displayed are able to be turned ON and
will be underlined, or OFF and will be de-underlined by pressing the
button beneath the parameter name in the window.
• You will notice that one LED for each display will be lit for all Pages except
for TRACK X, RAMP Xand NAME.
TRACK X and RAMP X will not have either LED lit for the Upper Display
switches because the displays for these Pages simply list the available
"fixed" parameters - along with their corresponding Amounts in the Lower
Display - and are never modulated.
NAME will also not have either LED lit for the Upper Display switches. This
is because the switches directly beneath NAMEand MODULATION
ROUTINGS are used to select these two additional Sub-Pages.
Sub-Page Selection
All Primary Pages in this section, except for TRACK X and NAME, have more
parameters than can be displayed in the Primary Page windows. Pressing the
PAGE 2 switch displays for you the additional parameters that can be used in
programming the selected Page.
You will notice that all PAGE 2 functions have SWITCH MODEs of ON/OFF. All
Primary Pages have MODULATION SOURCE SELECT (for those with
possible Destination parameters) and VALUE X SWITCH MODEs. This design
keeps Page operation consistent.
Matrix-12 Owner's Manual 41

Oberheim Matrix-12 Specifications

General

Brand	Oberheim
Model	Matrix-12
Category	Synthesizer
Language	English