Oberheim Matrix-12 User Manual

n
HOOKUP
AC Power
The MATRIX-12 can operate on AC power between 95-130 volts or 200-240
volts, depending upon the setting of the recessed power selector switch, located
on the rear panel near the AC receptacle.The MATRIX-12 is shipped from the
factory set for local AC.
The small, rectangular AC receptacle on the back panel will be protected by a
metal-foil cover. Remove this cover, plug the female end of the AC cord into the
MATRIX-12 and the male end into your wall outlet.
Turn on the MATRIX-12 with the power switch next to the power socket on the
back panel. Does the power switch light up? Do the front panel displays light up?
If not, check your connections.
Mixer/Amp
1
MIDI Out
AC Power
Left Mono Right Wtm
Audio Outputs :?::::::::::::::::•>:
Peda] 3/Trigger
In Out Thru:-:
:;:•:•:; MIDI mt
iiiiiiiiiimiiiiiiniH
Matrix-12 Owner's Manual
13

Oberheim Matrix-12 Specifications

General

Brand	Oberheim
Model	Matrix-12
Category	Synthesizer
Language	English