109
DECO STOP MAIN Display (Default),
information provided includes (Fig. 94) -
> T issue Loading Bar Graph (all segments indicating DECO)
> Graphic message DECO > STOP > xxF or xxM, scrolling
> TMT Link icon and Tank Pressure with the PSI (or BAR) icon,
if a TMT is active and linked
> Stop Time (hr:min) with symbols STOP and TIME
> Total Ascent T ime with symbols TIME and TAT
> Symbol NITROX (if set for Nitrox)
> Current Depth with symbol FT (or M)
While the DECO STOP MAIN screen is displayed, press/
release the A button (< 2 sec) to view DECO STOP ALT 1.
While the DECO STOP ALT 1 screen is displayed, press/
release the A button (< 2 sec) to view DECO STOP ALT 2.
Press/hold the M button (2 sec) to access the TMT 2-3 USE
screen and Gas Switch Routine (or Buddy Pressure Check).
Total Ascent Time
Total Ascent Time (Fig. 94a) includes Stop Times required at all
required decompression ceilings and vertical Ascent Time
calculated at 60 FPM (18 MPM) for depths deeper than 60 FT
(18 M), and 30 FPM (9 MPM) for depths of 60 FT (18 M) and
shallower.
Fig. 94 - DECO STOP MAIN
a
To Next Page
Loading...
Need help?
General
