Olympus OER-Pro - Page 252

246
Chapter 7 Routine Maintenance
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
1. Make sure that the power switch is ON.
2. Press the FUNC SEL button on the subcontrol panel to select “LOAD LCG”.
3. Press the FUNC START button on the subcontrol panel.
4. Step on the foot pedal to open the lid.
5. As multiple beeps sound, the time display on the main panel alternates
between Figure 7.80 (a) and (b) indicating that it is ready to add the
disinfectant solution.
Figure 7.80
6. Slowly pour the disinfectant solution to the drain port into the reprocessing
basin (see Figure 7.81).
Figure 7.81
(a) (b)