Omron 3G3MX2-A2002-EV2 - Page 209

5 Basic Settings
5 - 7
Multi-function Compact Inverter 3G3MX2-EV2 User’s Manual (I666-E1)
• The 3G3MX2-EV2 Series Inverter provides two controls that can be switched as required.
• Even with a single motor, you can use the 2nd control to configure the control and settings suitable
for your application.
• The 2nd control is allocated in the 200s parameter number (e.g. A201 relative to A001).
For the explanation of the 2nd control, refer to 7-4-3 2nd Control Function (SET) on page 7-33.
Clearing Fault Monitor Data
5
5-1 Parameter Display and Parameter Initialization
5-1-2 Parameter Initialization
Step 2: Set b180 to 01 and
press the Enter
key.
Enter
Step 1: Set b084 to 04 and
press the Enter
key.
Enter
Clearing
completed
Switching between 1st and 2nd Controls