Omron 3G3MX2-A2002-EV2 - Terminal EO (Pulse;Pwm Output)

7 Other Functions
7 - 27
Multi-function Compact Inverter 3G3MX2-EV2 User’s Manual (I666-E1)
(Example 2) A015/A165 = 01 (0 Hz)
7-3-6 Terminal EO (Pulse/PWM Output)
The terminal EO provides 10-VDC pulse output or PWM output.
The terminal EO on the control circuit terminal block enables the monitoring of the output frequency
and the output current.
Select the signal you want to output from the following table.
For pulse output signals (03, 08, 15), use a digital frequency counter. For other output signals, use an
analog meter.
Parameter
No.
Function
name
Data
Description
PWM/
Pulse
Full-scale value
C027
EO
Selection
00
Output frequency
*1 *2
PWM
0 to Maximum frequency [Hz]
01
Output current
PWM
0 to 200%
02
Output torque
*3
PWM
0 to 200%
03
Digital output frequency
*4
Pulse
0 to Maximum frequency [Hz]
04
Output voltage
PWM
0 to 133%
(Example: For 200-V class, 7.5 V
at 200 V)
05
Input power
PWM
0 to 200%
06
Electronic thermal load rate
PWM
0 to 100%
07
LAD frequency
*1
PWM
0 to Maximum frequency [Hz]
08
Digital current monitor
Pulse
Refer to EO Gain Setting on page
7-28.
10
Cooling fin temperature
PWM
0 to 200°C (Outputs 0°C for 0°C or
lower)
12
DriveProgramming (YA(0))
PWM
Use DriveProgramming to set this
function. (0.00 to 100.00%)
15
Pulse train input monitor
Pulse
Refer to EO Gain Setting on page
7-28.
16
Option (No applicable
Option)
−
−
7
7-3 Analog I/O Settings
7-3-6 Terminal EO (Pulse/PWM Output)
EO Selection