Multi-function Compact Inverter 3G3MX2-EV2 User’s Manual (I666-E1)
Motor Parameter R1 (Auto-tuning Data)
Motor Parameter R2 (Auto-tuning Data)
Motor Parameter L (Auto-tuning Data)
Motor Parameter Io (Auto-tuning Data)
Motor Parameter J (Auto-tuning Data)
It is not possible to distinguish between the 1st and 2nd control functions on the display. Check the
ON/OFF status of each terminal to determine which control function is enabled.
During operation, attempts to switch between the 1st and 2nd control functions fail. Because switching
is enabled only during stop, the inverter will be switched after the operation is stopped.
To Next Page
Loading...
Need help?
General