Omron M1 Series User Manual

Menu LED display Main function
Data setting
F group parameters
Display/
change of pa-
rameters
E group parameters
E1 group parameters
C group parameters
P group parameters
H group parameters
H1 group parameters
H3 group parameters
H4 group parameters
A group parameters
b group parameters
r group parameters
J group parameters
J1 group parameters
d group parameters
d1 group parameters
d2 group parameters
y group parameters
Data check Display/change of changed parameters
Operation monitor
Operation status display
I/O check DIO, AIO status display
Maintenance Maintenance information display
Alarm information
Alarm information display
User preferences (user parame-
ters)
Display/change of user preferences (user parame-
ters)
*1
*1. When there are no parameters registered as user preferences, the menu item is hidden.
3 Operation and Test Run
3-8
M1 Series Standard Type User's Manual (I669)

Omron M1 Series Specifications

General

Input Voltage	200-240V AC
Output Voltage	3-phase 200 to 240 VAC
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
Communication	RS-485, Modbus RTU
Enclosure	IP20
Cooling Method	Fan Cooled
Operating Temperature	-10°C to +50°C
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m
Frequency Range	0.5-400 Hz
Storage Temperature	-20°C to +65°C