13
Items to Check after Unpacking
OMNUC G5-Series AC Servo Drives Users Manual (Built-in MECHATROLINK-II communications type)
Items to Check after Unpacking
After unpacking, check the following items.
Is this the model you ordered?
Is there any damage sustained during shipment?
Accessories of This Product
Safety Precautions document x 1 copy
Connectors, mounting screws, mounting brackets, and other accessories other than those in the
table below are not supplied. They must be prepared by the customer.
The safety bypass connector is required when the safety function is not used. To use the safety
function, provide a Safety I/O Signal Connector separately.
If any item is missing or a problem is found such as Servo Drive damage, contact the OMRON
dealer or sales office where you purchased your product.
Specifications
Connector for Main circuit power
supply terminals and Control
circuit power supply terminals
Connector for External
Regeneration Resistor
connection terminals and
Motor connection terminals
Safety
bypass
connector
Single-
phase 100
VAC
50 W
Included
100 W
200 W
400 W
Single-
phase/3-
phase 200
VAC
100 W
200 W
400 W
750 W
1 kW
1.5
kW
3-phase
200 VAC
2 kW
3 kW
Included
5 kW
3-phase
400 VAC
600 W
Included
1 kW
1.5
kW
2 kW
3 kW
Included
5 kW
To Next Page
Loading...
Need help?
General
