Omron R88D-KN ML2 Sries User Manual

8-30
8-5 Interface Monitor Setting Parameters
OMNUC G5-Series AC Servo Drives Users Manual (Built-in MECHATROLINK-II communications type)
8
Parameters Details
8-5 Interface Monitor Setting Parameters
Set the function and logic for the general-purpose input 1 (IN1).
Refer to the Details of Control Inputs in "3-1 Servo Drive Specifications (P.3-1)", as well as "6-1
Sequence I/O Signal (P.6-1)".
Set the function and logic for the general-purpose input 2 (IN2).
Refer to the Details of Control Inputs in "3-1 Servo Drive Specifications (P.3-1)", as well as "6-1
Sequence I/O Signal (P.6-1)".
Set the function and logic for the general-purpose input 3 (IN3).
Refer to the Details of Control Inputs in "3-1 Servo Drive Specifications (P.3-1)", as well as "6-1
Sequence I/O Signal (P.6-1)".
Set the function and logic for the general-purpose input 4 (IN4).
Refer to the Details of Control Inputs in "3-1 Servo Drive Specifications (P.3-1)", as well as "6-1
Sequence I/O Signal (P.6-1)".
Set the function and logic for the general-purpose input 5 (IN5).
Refer to the Details of Control Inputs in "3-1 Servo Drive Specifications (P.3-1)", as well as "6-1
Sequence I/O Signal (P.6-1)".
Set the function and logic for the general-purpose input 6 (IN6).
 Refer to the Details of Control Inputs in "3-1 Servo Drive Specifications (P.3-1)", as well as "6-1
Sequence I/O Signal (P.6-1)".
Set the function and logic for the general-purpose input 7 (IN7).
Refer to the Details of Control Inputs in "3-1 Servo Drive Specifications (P.3-1)", as well as "6-1
Sequence I/O Signal (P.6-1)".
Pn400
Input Signal Selection 1
Setting range 0 to 00FFFFFFh Unit

Default setting 00949494h Data attribute C
All
Pn401
Input Signal Selection 2
Setting range 0 to 00FFFFFFh Unit  Default setting 00818181h Data attribute C
All
Pn402
Input Signal Selection 3
Setting range 0 to 00FFFFFFh Unit  Default setting 00828282h Data attribute C
All
Pn403
Input Signal Selection 4
Setting range 0 to 00FFFFFFh Unit  Default setting 00222222h Data attribute C
All
Pn404
Input Signal Selection 5
Setting range 0 to 00FFFFFFh Unit  Default setting 002B2B2Bh Data attribute C
All
Pn405
Input Signal Selection 6
Setting range 0 to 00FFFFFFh Unit  Default setting 00212121h Data attribute C
All
Pn406
Input Signal Selection 7
Setting range 0 to 00FFFFFFh Unit  Default setting 00202020h Data attribute C
All

Omron R88D-KN ML2 Sries Specifications

General

Brand	Omron
Model	R88D-KN ML2 Sries
Category	Servo Drives
Language	English