1-11
1-5 Applicable Standards
1
OMNUC G5-Series AC Servo Drives Users Manual (Built-in MECHATROLINK-II communications type)
Features and System Configuration
1-5 Applicable Standards
This section describes applicable EMC Directives.
EC Directives
Note. To conform to EMC directives, the Servomotor and Servo Drive must be installed under the conditions described
in "4-3 Wiring Conforming to EMC Directives" (P.4-21).
UL and cUL Standards
*1 The R88D-KN20x-ML2 and lower capacity Servo Drives are UL-listed.
The R88D-KN30x-ML2 and higher capacity Servo Drives are UL-recognized.
*2 Motor capacity is 50 to 750 W when the power supply voltage is 100 V or 200 V and the rated number
of motor rotation speed is 3,000 r/min.
EC
directive
Product Applicable standards
Low voltage
command
AC Servo Drive EN 61800-5-1
AC Servomotor EN60034-1/-5
EMC
directives
AC Servo Drive EN 55011 class A group 1
IEC61800-3
EN61000-6-2
Machinery
Directive
AC Servo Drive EN954-1 (Category 3)
EN ISO13849-1: 2008 (Category 3) (PLc,d)
ISO13849-1: 2006 (Category 3) (PLc,d)
EN61508 (SIL2)
EN62061 (SIL2)
EV61800-5-2 (STO)
IEC61326-3-1 (SIL2)
Standard Product Applicable standards File number
UL
standards
AC Servo Drive UL508C E179149
*1
AC Servomotor UL1004-1
*2
E331224
UL1004 E179189
CSA
standards
AC Servo Drive CSA22.2 No. 14 E179149
AC Servomotor CSA22.2 No. 100
*2
E331224
CSA22.2 No. 100 E179189
To Next Page
Loading...
Need help?
General
