Omron R88D-KN ML2 Sries - Page 164

3-69
3-4 Cable and Connector Specifications
OMNUC G5-Series AC Servo Drives Users Manual (Built-in MECHATROLINK-II communications type)
3
Specifications
Power Cable Connector (R88A-CNK11A)
This connector is used for power cables.
Use it when preparing a power cable by yourself.
Angle plug model JN8FT04SJ1
(Japan Aviation Electronics)
Socket contact model ST-TMH-S-C1B-3500-(A534G)
(Japan Aviation Electronics)
Brake Cable Connector (R88A-CNK11B)
This connector is used for brake cables.
Use it when preparing a brake cable by yourself.
Angle plug model JN4FT02SJ1-R
(Japan Aviation Electronics)
Socket contact model ST-TMH-S-C1B-3500-(A534G)
(Japan Aviation Electronics)
17.6
28.8
φ13
32
27.6
22
12
R5.5
14.7
13.5
3
11
11
The cable direction from the angle plug
can be reversed.
Note. If you reverse the direction, you
cannot attach the Connector to
Servomotors of 50 W and 100 W.
29.6
12.3
17
12.5
14.3
19
2.5
11.8
R6
12.7
φ11.6
(8.8)
R4
The cable direction from the angle plug
can be reversed.