Omron R88D-KN ML2 Sries User Manual

8-45
8-6 Extended Parameters
OMNUC G5-Series AC Servo Drives Users Manual (Built-in MECHATROLINK-II communications type)
8
Parameters Details
 Select either to let the servo off or to stop the alarm when a main power alarm occurs.
Explanation of Set Values
 Set main power supply alarm detection time.
 The main power supply OFF detection is disabled if this is set to 2000.
Pn508
Undervoltage Alarm Selection
Setting
range
0 to 1 Unit 
Default
setting
1
Data
attribute
B
All
Set value Explanation
0
Servo is turned OFF based on the setting of the Stop Selection with Main Power Supply OFF
(Pn507) and turn it back to Servo ON state by turning ON the main power supply.
1
The Main power supply undervoltage (Alarm No.13.1) occurs. Stops the operation by the
alarm.
Pn509
Momentary Hold Time
Setting
range
70 to 2000 Unit 1 ms
Default
setting
70
Data
attribute
C
All

Omron R88D-KN ML2 Sries Specifications

General

Brand	Omron
Model	R88D-KN ML2 Sries
Category	Servo Drives
Language	English