EasyManua.ls Logo

Omron Sysmac NJ-series - Page 453

Omron Sysmac NJ-series
578 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15-15
15 Troubleshooting
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
15-2 Troubleshooting
15
15-2-1 Error Table
34270000 hex Tag Name
Resolution
Error
Resolution of a tag
used in a tag data
link failed.
The size of the network variable
is different from the tag set-
tings.
The I/O direction set for a tag
data link and the I/O direction of
the Controller variable do not
match.
There are no network variables
for the Controller tag settings.
A variable in the Controller that
is set for a tag data link has the
Network Publish attribute set to
Input but also has the Constant
attribute.
S page 15-31
34280000 hex
(Ver. 1.10 or
later)
Basic Ether-
net Setting
Error
An error was
detected in the
Ethernet settings.
Parameter error
Power was interrupted when a
download was in progress for
the built-in EtherNet/IP port set-
tings.
A memory error occurred.
S page 15-32
34290000 hex
(Ver. 1.10 or
later)
IP Address
Setting Error
An error was
detected in the IP
address settings.
Parameter error
Power was interrupted when a
download was in progress for
the built-in EtherNet/IP port set-
tings.
The IP address acquired from
BOOTP server is illegal.
A memory error occurred.
S page 15-33
342A0000 hex
(Ver. 1.10 or
later)
DNS Setting
Error
An error was
detected in the
DNS settings or
Hosts settings.
Parameter error
Power was interrupted when a
download was in progress for
the built-in EtherNet/IP port set-
tings.
A memory error occurred.
S page 15-34
50010000 hex
(Ver. 1.02 or
later)
Controller
Insufficient
Memory
Warning
The amount of data
for the EtherCAT
slave configura-
tion, network-pub-
lished information,
or other data
exceeds the value
that is specified for
the CPU Unit. You
may not be able to
perform online edit-
ing or other opera-
tions.
The amount of data for the Eth-
erCAT slave configuration, net-
work-published information, or
other data exceeds the value
that is specified
for the C
PU
Unit.
S page 15-35
84030000 hex DNS Server
Connection
Error
Connection with the
DNS server failed.
Parameter error
Server is down.
An error occurred in the com-
munications path.
S page 15-36
84040000 hex NTP Server
Connection
Error
Connection with the
NTP server failed.
Parameter error
Server is down.
An error occurred in the com-
munications path.
S page 15-36
84070000 hex Tag Data Link
Connection
Failed
Establishing a tag
data link connection
failed.
The tag data link connection
information is not the same for
the originator and target.
Insufficient connections
S page 15-37
Event code Event name Meaning Assumed cause
Level
Reference
Maj Prt Min Obs Info

Table of Contents

Other manuals for Omron Sysmac NJ-series

Related product manuals