Onkyo TX-NR545 - Manual

TuningintoaRadioStation
Tuningautomatically
1. PressTUNERonthemainunitseveraltimestoselecteither"AM"or
"FM".
2. PressTUNINGMODEsothatthe"AUTO"indicatoronthedisplaylights.
3. Press TUNING tostartautomatictuning.
 Searchingautomaticallystopswhenastationisfound.Whentuned
intoaradiostation,the" TUNED "indicatoronthedisplaylights.
WhentunedintoanFMradiostation,the"FMSTEREO"indicator
lights.
 Nosoundisoutputwhilethe" TUNED "indicatorisoff.
WhenthesignalfromanFMradiostationisweak:Radiowavemaybe
weakdependingonthebuildingstructureandenvironmentalconditions.In
thatcase,performthemanualtuningprocedureasexplainedinthenext
section,"Tuningmanually",tomanuallyselectthedesiredstation.
Tuningmanually
Details on AM/FM reception