Onkyo TX-NR545 - Tuning to the Frequency Directly

1. PressTUNERonthemainunitseveraltimestoselecteither"AM"or
"FM".
2. PressTUNINGMODEsothatthe"AUTO"indicatoronthedisplaygoes
off.
3. Press TUNING toselectthedesiredradiostation.
 Thefrequencychangesby1stepeachtimeyoupressthebutton.The
frequencychangescontinuouslyifthebuttonishelddownandstops
whenthebuttonisreleased.Tunebylookingatthedisplay.
Toreturntoautomatictuning:PressTUNINGMODEonthemainunit
again.Theunitautomaticallytunesintoaradiostation.Normally"AUTO"
shouldbedisplayed.
Tuningtothefrequencydirectly
Itallowsyoutodirectlyenterthefrequencyoftheradiostationyouwantto
listento.
1. PressTUNERontheremotecontrollerseveraltimestoselecteither"AM"
or"FM".