Onkyo TX-NR545 - Speaker Channels; Subwoofer; Height Speaker

2.Speaker
Allowsyoutochangethespeakerconfigurationsuchaspresenceornotof
subwoofer,crossoverfrequency,andsoon.Settingsareautomatically
configuredifyouusetheAutomaticSpeakerSetup.
Thissettingcannotbeselectedifheadphonesareconnectedoraudiois
outputfromthespeakersoftheTV.
Configuration
Youcanchangethenumberofspeakerchannelsconnected,thetypeof
frontspeakerconnection,theheightspeakertype,andotherspeaker
settings.
SpeakerChannels
DefaultValue:7.1ch
Select"2.1ch","3.1ch","4.1ch","5.1ch","6.1ch","7.1ch","2.1.2ch",
"3.1.2ch","4.1.2ch",or"5.1.2ch"tosuitthenumberofspeaker
channelsconnected.
Subwoofer
DefaultValue:Yes
Setwhetherasubwooferisconnectedornot.
"Yes":Whensubwooferisconnected
"No":Whensubwooferisnotconnected
HeightSpeaker
DefaultValue:FrontHigh
SetthespeakertypeifheightspeakersareconnectedtotheBACKor
HEIGHTterminals.
Select"FrontHigh","TopFront","TopMiddle","TopRear","RearHigh",
"DolbySpeaker(Front)",or"DolbySpeaker(Surr)"accordingtothe
connectedspeakertypeandlocation.
 Ifanitemcannotbeselectedeventhoughconnectioniscorrect,
checkthatthesettingsin"SpeakerChannels"matchesthenumber
ofconnectedchannels.
BiAmp
Advanced Settings (Setup Menu)