Onkyo TX-NR545 - Audio Return Channel; Auto Lipsync; Sleep Timer; Power Management

 Listeningmodecannotbechangedwhile"AudioTVOut"issetto
"On"andaudioisbeingoutputthroughthespeakersoftheTV.
 DependingonyourTVsetorinputsignalofthecomponent,audio
maynotoutputthroughthespeakersoftheTVevenifthissettingis
setto"On".Insuchcase,audioisoutputfromthespeakersofthe
unit.
 IfyouoperatetheMASTERVOLUMEcontrolontheunitwhen
"AudioTVOut"or"HDMICEC(RIHD)"is"On"andaudioisoutput
fromtheTVspeakers,audiowillbeoutputfromtheunit.Ifyoudo
notwanttooutputaudiofromtheunit,changetheunitorTV
settings,orreducethevolumeoftheunit.
AudioReturnChannel
DefaultValue:Auto
YoucanenjoysoundoftheHDMIconnectedARCcompatibleTV
throughthespeakersconnectedtotheunit.Tousethisfunction,set
"HDMICEC(RIHD)"to"On"inadvance.
"Auto":WhenenjoyingtheTVsoundthroughthespeakersconnected
totheunit
"Off":WhennotusingtheARCfunction
AutoLipSync
DefaultValue:On
Thissettingautomaticallycorrectsanydesynchronizationbetweenthe
videoandaudiosignalsbasedondatafromtheHDMILipSync
compatibleTV.
"On":Automaticcorrectionwillbeenabled.
"Off":Automaticcorrectionwillbedisabled.
PowerManagement
SleepTimer
DefaultValue:Off
Selecttoturntheunitintostandbymodeautomaticallywhenthe
specifiedtimeelapses.Selectavaluebetween"10min"to"90min".
"Off":Selectifyoudonotwanttheunittoautomaticallyswitchto
standby.
AutoStandby
DefaultValue:On/Off
Thissettingplacestheunitonstandbyautomaticallyafter20minutesof
inactivitywithoutanyvideooraudioinput.