Onkyo TX-NR545 - Listening Mode Preset; Analog;Pcm; Mono;Multiplex; 2 Ch Source

5.ListeningModePreset
Youcanpresetyourfavoritelisteningmodetoeachinput.(Forexample,you
canalwaysapplystraightdecodetotheDolbyTrueHDsourceofBluray
Disctoplayitinunchangedsoundfield.)
Whenthelistofinputsourcesisdisplayed,setthesignaltypeandlistening
mode.
Althoughitispossibletoselectthelisteningmodeduringplayback,the
selectedmodewillberesetwhentheunitentersstandbymode.
Analog/PCM
DefaultValue:LastValid
SetthelisteningmodeforplayingPCMsignalsofCDandanalog
signalsofrecordandcassettetape.
Mono/Multiplex
DefaultValue:LastValid
SetthelisteningmodeforplayingDolbyDigitalandotherdigitalsignals
recordedinmonauralormultiplexaudio.
2chSource
DefaultValue:LastValid
SetthelisteningmodeforplayingDolbyDigitalandotherdigitalsignals
recordedin2channels.
DolbyD/DolbyD+/TrueHD
DefaultValue:LastValid
SetthelisteningmodeforplayingDolbyDigital,DolbyDigitalPlusand
DolbyTrueHDsignals.
DTS/DTSES/
DTSHD
DefaultValue:LastValid
Advanced Settings (Setup Menu)