Onkyo TX-NR545 - TV out; OSD Language; Impose OSD; Screen Saver

1.Input/OutputAssign
TVOut
MakesettingsfortheonscreendisplayfunctionontheTVwhenyouusethe
settingmenu,forexample.
OSDLanguage
DefaultValue:English
Selecttheonscreendisplaylanguage.
SelectfromEnglish,German,French,Spanish,Italian,Dutch,Swedish,
Russian(European,AustralianandAsianmodels),orChinese
(European,Australian,TaiwaneseandAsianmodels).
ImposeOSD
DefaultValue:On
SetwhetherornottodisplaytheinformationontheTVwhenthe
volumeisadjustedorinputischanged,forexample.
"On":OSDwillbedisplayedontheTV.
"Off":OSDwillnotbedisplayedontheTV.
 TheOSDmaynotbedisplayeddependingontheinputsignaleven
if"On"isselected.Iftheoperationscreenisnotdisplayed,change
theresolutionoftheconnecteddevice.
ScreenSaver
DefaultValue:3minutes
Setthetimetostartthescreensaver.Selectavaluefrom"3minutes",
"5minutes","10minutes"and"Off".
HDMIInput
YoucanchangeinputassignmentbetweentheinputselectorsandHDMIIN
jacks.
BD/DVD
DefaultValue:HDMI1(HDCP2.2)
Advanced Settings (Setup Menu)