Onkyo TX-NR545 - Checking Whether the HDMI Linked Operation Settings Are Enabled

CheckingwhethertheHDMILinkedOperation
SettingsAreEnabled
1. Turnonthepowerofallconnectedcomponents.
2. TurnoffthepoweroftheTV,andconfirmthatthepoweroftheconnected
componentsisturnedoffautomaticallywiththelinkoperation.
3. TurnonthepoweroftheBlurayDisc/DVDplayer/recorder.
4. StartplaybackontheBlurayDisc/DVDplayer/recorder,andverifythe
following:
 TheAVreceiverautomaticallyturnson,andselectstheinputtowhich
theBlurayDisc/DVDplayer/recorderisconnected.
 TheTVautomaticallyturnson,andselectstheinputtowhichtheAV
receiverisconnected.
5. FollowingtheinstructionmanualoftheTV,select"UsetheTVspeakers"
fromthemenuscreenoftheTV,andconfirmthattheaudioisoutputfrom
thespeakersoftheTV,andnotfromthespeakersconnectedtotheAV
receiver.
6. Select"UsethespeakersconnectedfromtheAVreceiver"fromthemenu
screenoftheTV,andconfirmthattheaudioisoutputfromthespeakers
connectedtotheAVreceiver,andnotfromtheTVspeakers.
Caution:
 EvenifyousettooutputaudioontheTVspeakers,audiowillbeoutput
fromthespeakersconnectedtotheAVreceiverwhenyouadjustthe
volumeorswitchtheinputontheAVreceiver.Tooutputaudiofromthe
TVspeakers,redothecorrespondingoperationsontheTV.
 IncaseofanRIHDconnectionwithRIandRIEXaudiocontrol
compatiblecomponents,donotconnecttheRIcableatthesametime.
 OntheTV,whenyouselectanythingotherthantheHDMIjacktowhich
theAVreceiverisconnected,theinputontheAVreceiverwillbe
switchedto"TV".
 TheAVreceiverwillautomaticallypoweroninconjunctionwhenit
determinesittobenecessary.EveniftheAVreceiverisconnectedtoan
RIHDcompatibleTVorplayer/recorder,itwillnotpoweronifitisnot
necessary.ItmaynotpoweroninconjunctionwhentheTVissetto
outputaudiofromtheTV.
 LinkedsystemfunctionswiththeAVreceivermaynotworkdependingon
thecomponentmodelconnected.Insuchcases,operatetheAVreceiver
directly.
 Whentheplayer/recordercannotbeoperatedwiththeremotecontroller
Reference Information