Onkyo TX-NR545 - Reset Procedures; Unit Reset Procedure

PresettinganAM/FMRadioStation
Itallowsyoutoregisterupto40ofyourfavoriteAM/FMradiostations.
Registeringradiostationsinadvanceallowsyoutotuneintoyourradio
stationofchoicedirectly.
RegistrationProcedure
1. TuneintotheAM/FMradiostationyouwanttoregister.
2. PressMEMORYontheunitsothatthepresetnumberonthedisplay
flashes.
3. Press PRESET severaltimestoselectanumberbetween1and40
whilethepresetnumberisflashing(about8seconds).
4. PressMEMORYagaintoregisterthestation.
 Whenthestationisregistered,thepresetnumberstopsflashing.
 RepeatthisprocedureforallofyourfavoriteAM/FMradiostations.
SelectingaPresetRadioStation
1. PressCH+/ontheremotecontrollertoselectapresetnumber.
 Alternativelyyoucanpress PRESET onthemainunit.Youcan
alsoselectbydirectlyenteringthepresetnumberwiththenumber
buttonsontheremotecontroller.
Details on AM/FM reception