Onkyo TX-NR545 - Bluetooth; Auto Input Change; Auto Reconnect; Pairing Information

 Waitforawhileif"Network"cannotbeselected.Itwillappearwhenthe
networkfunctionisstartedup.
Bluetooth
Bluetooth
DefaultValue:On
SelectwhetherornottousetheBluetoothfunction.
"On":EnablesconnectionwithaBluetoothenableddevicebyusingthe
Bluetoothfunction.Select"On"alsowhenmakingvariousBluetooth
settings.
"Off":WhennotusingtheBluetoothfunction
AutoInputChange
DefaultValue:On
Theinputoftheunitwillautomaticallybeswitchedto"BLUETOOTH"
whenconnectionismadefromaBluetoothenableddevicetotheunit.
"On":Theinputwillautomaticallybecome"BLUETOOTH"whena
Bluetoothenableddeviceisconnected.
"Off":Thefunctionisdisabled.
 Iftheinputisnotswitchedautomatically,setto"Off"andchangethe
inputmanually.
AutoReconnect
DefaultValue:On
ThisfunctionautomaticallyreconnectstotheBluetoothenableddevice
connectedlastwhenyouchangetheinputselectorto"BLUETOOTH".
"On":Usethisfunction
"Off":Donotusethisfunction
 ThismaynotworkwithsomeBluetoothenableddevices.
PairingInformation
DefaultValue:–
Theinformationofthepreviouspairingstoredinthisunitwillbe
initialized.
PressingENTERwhen"Clear"isdisplayedinitializesthepairing
informationstoredinthisunit.
 Thisfunctiondoesnotinitializethepairinginformationonthe
Bluetoothenableddevice.Whenpairingtheunitagainwiththe
device,besuretoclearthepairinginformationontheBluetooth
enableddeviceinadvance.Forinformationonhowtoclearthe
pairinginformation,refertotheBluetoothenableddevice's
instructionmanual.