Onkyo TX-NR545 - Satellite Receiver; Cable Receiver Operation

Satellitereceiver/Cablereceiveroperation
PresstheREMOTEMODEbuttonprogrammedwiththeremotecontrolcode
fortherelevantAVcomponenttoswitchtheremotecontrollermodetothat
fortheAVcomponent.Then,operatebyusingthecorrespondingbuttons.
Availablebuttonsvarydependingontheproductcategoryofthecomponent.
Operationmaybeincorrectorimpossibledependingontheproduct.
1 REMOTEMODE
2 SOURCE
3 MUTING
4 CH+/–
5 GUIDE
6 / / / ,ENTER
7 HOME
8 PREVCH
9 RETURN
Operating Other Components with the Remote
Controller