Onkyo TX-NR545 - Cannot Connect with this Unit

Cannotconnectwiththisunit
 TheBluetoothfunctionoftheBluetoothenableddeviceisnotenabled.
RefertotheusermanualoftheBluetoothenableddeviceforhowto
enabletheBluetoothfunction.
 WhenbuildingaBluetoothconnectionbetweenthisunitandyour
Bluetoothenableddeviceforthefirsttime,iftheconnectionfails,select
"6.Hardware""Bluetooth",execute"Clear"in"PairingInformation",turn
offandthenonagainyourBluetoothenableddevicetoclearthedevice
name,andbuildtheBluetoothconnectionagain.
 IfthewirelessLANandBluetoothconnectionsareusedatthesametime,
tryconnectingtheETHERNETportandrouterwiththeEthernetcable
afterselecting"6.Hardware""Network"andchanging"WiFi"to"Off
(Wired)"forabetterconnection.
Troubleshooting