Onkyo TX-NR545 - Firmware Management; Firmware Version Check and Update Preparation

Operation:YoucansetupbyviewingtheguidancedisplayedontheTV
screen(OSD).Selecttheitemwiththecursorbuttonsoftheremote
controllerandpressENTERtoconfirmyourselection.Toreturntothe
previousscreen,pressRETURN.
 (European,Australian,TaiwaneseandAsianmodels)IftheOSD
languageissettoChinese,theoperationsinthissectionarenot
displayedontheTV.Operatebylookingatthedisplayonthemainunit.
Notethatthedisplayonthemainunitdoesnotsupportthedisplayof
Chinesecharacters.Charactersthatcannotbedisplayedarereplaced
withasterisks( ).
PlayingBack
1. PlugyourUSBstoragedevicewiththemusicfilesintotheUSBporton
therearoftheunit.
2. PressNETontheremotecontrollertodisplaytheNETTOPscreen.
Playing Music Files on a USB Storage Device