Onkyo TX-NR545 - CD Player Operation

CDplayeroperation
PresstheREMOTEMODEbuttonprogrammedwiththeremotecontrolcode
fortherelevantAVcomponenttoswitchtheremotecontrollermodetothat
fortheAVcomponent.Then,operatebyusingthecorrespondingbuttons.
Availablebuttonsvarydependingontheproductcategoryofthecomponent.
Operationmaybeincorrectorimpossibledependingontheproduct.
1 REMOTEMODE
2 SOURCE
3 MUTING
4 DISC+/–
5 / / / ,ENTER
6 HOME
Operating Other Components with the Remote
Controller