Onkyo TX-NR545 - Proxy URL; Proxy Port; Friendly Name

"Enable":AutoconfigurationbyDHCP
"Disable":ManualconfigurationwithoutDHCP
 Ifselecting"Disable",youmustset"IPAddress","SubnetMask",
"Gateway",and"DNSServer"manually.
IPAddress
DefaultValue:–
Displays/SetstheIPaddress.
SubnetMask
DefaultValue:–
Displays/Setsthesubnetmask.
Gateway
DefaultValue:–
Displays/Setsthegateway.
DNSServer
DefaultValue:–
Displays/SetstheprimaryDNSserver.
ProxyURL
DefaultValue:–
Displays/SetstheproxyserverURL.
ProxyPort
DefaultValue:–
Displays/Setstheproxyserverportnumberwhenyouenter"Proxy
URL".
FriendlyName
DefaultValue:TXNR545
Changethenameforthisunittoasimpleonefordisplayonthe
equipmentconnectedbynetwork.
1. PressENTERtodisplaytheEditscreen.
2. SelectacharacterorsymbolwiththecursorsandpressENTER.
Repeatittoinput31orlesscharacters.
"A/a":Switchesbetweenupperandlowercases.(Pressing+10on
theremotecontrolleralsotogglesbetweenupperandlowercases.)
"←""→":Movesthecursortothearrowdirection.